Article by :- Priya Kumari
Introduction
NEER Internet Controller is a product of the Krishiverse initiative and a smart irrigation management system is equipped to automate and optimize water usage in agriculture. With the help of the system, the farmers will be able to keep an eye on water flow, motor operation, or scheduling and also they can control these operations from any place via the internet. By its simple installation and smart connectivity, it is now feasible to irrigate the fields from a distance and hence, make the precious water available for farms and gardens.
Step 1: Unboxing and Component Check
The NEER Internet Controller kit normally includes the main controller unit, a power adapter, a few wiring connectors, a motor relay, and a user manual. Before you begin the installation, it is wise to make sure that all the parts are present and that they are in good working condition. When everything is in good condition for the installation, it is not only easy to install, but also the probability of mistakes during wiring is greatly reduced.
Step 2: Mounting the Controller
In order to make the wiring connections easier, the controller should be put near the motor or the water pump. Besides that, it is strongly suggested that the mounting be carried out on a dry wall or a covered place that is not exposed to the sun or rain. Proper positioning ensures both the safety of the signal and the security of the user.
Step 3: Power and Motor Connection
When the controller is fixed, the power input and the motor should be connected according to the wiring diagram provided in the manual. The live, neutral, and ground wires should be correctly connected to the terminals that are made for them. A power supply of around 230V AC which is in good condition is what the controller requires to work properly.
Step 4: Sensor and Valve Connections
The NEER Network Controller is an facilitative device for the use of the soil that the ground may be met by the moisture probes, flow meters, and solenoid valves. The physical association of every sensor and valve with the respective input and output ports on the controller is a must. There is no question that these types of sensors constitute the necessity of the performance of irrigation automation based on real-time data.
https://youtu.be/Bm13bft88Eo?si=LUY1lj8um1UgkjFQ
Step 5: Network Configuration
Once the hardware installation is completed, the controller needs to be connected to an internet network. Depending on the model, it can be connected either by Wi-Fi or a SIM-based connection. After the installation, the device will be able to transmit the irrigation data in real-time to the NEER platform. This platform is the place from where the whole operation can be remotely controlled.
Step 6: Testing and Calibration
After the installation is finished, it is very important to test the whole system manually to check if it works properly. This testing confirms that the motor, valves, and sensors react properly to the control signals. Calibration can be used to adjust timing, flow rate, and moisture levels to get the best performance.
Step 7: Monitoring Through the NEER App
Once the NEER Internet Controller is installed, one will be able to control the device via the NEER mobile or web app. The platform is offering the possibility of live monitoring, irrigation scheduling, and receiving system alerts. Farmers can watch the performance, set the automation rules, and water their crops according to the data, thus they can save water and still increase their yield.
Conclusion
The NEER Internet Controller is a smart irrigation management tool that effectively combines technology with practicality. With accurate sensor data and internet connectivity, a farmer is able to automate irrigation, minimize resource wastage, and maximize production. The simple installation of the device along with its intelligent features makes it a step in the right direction for smart and environmentally friendly farming methods.